Accurist Calibre CP00 User Manual download pdf (Page 3)

QUICKSTART - SET THE TIME

1. Push the bottom right hand button until the mode hand

indicator points to TME.

2. Press and hold the upper left button for three

seconds.

The hour and minute hand will retract to the 12

O’clock position.

3. Select the time zone on the digital display by pressing the

upper right button or the lower left button.

4. Pull the bottom right button out one click. The bottom part of

the digital display will start flashing. Press the

bottom left button to adjust for daylight saving time.

5. Press the upper right button. You will see the seconds

flashing on the lower half of the digital display. Press the lower

left button to reset the seconds to 00.

Press the upper right button.

You will see the minutes

flashing. Press the lower left button to set the minutes to your

current time.

7. Press the upper right button. You will see the hours flashing.

Press the lower left button to set the hours to your current time.

8. Press the upper right button. You will see 12H or 24H

flashing. Press the lower left button to switch between 12 hour

and 24 hour.

9. Push the lower right button back in.

SET THE CALENDAR

1. Push the bottom right hand button until the mode hand

indicator points to CAL.

2. Press and hold the upper left button for three seconds. The

hour and minute hand will retract to the 12 O’clock position.

3. Select the time zone on the digital display by pressing the

upper right button or the lower left button.

Pull the bottom right button out one click.

ou will see the

month flashing on the digital display

. Press the lower left button

to change the month.

5. Press the upper right button and the date will begin flashing.

Press the lower left button to change the date.

6. Press the upper right button. You will see the year flashing.

Press the lower left button to change the year.

7. Push the lower right button back in.

SET THE

ALARMS

Push the bottom right hand button until the mode hand

indicator points to

AL1,

AL2 or

AL3.

2. Press and hold the upper left button for three seconds. The

hour and minute hand will retract to the 12 O’clock position.

3. Select the time zone on the digital display by pressing the

upper right button or the lower left button.

Pull the lower right button out one click. You will see ON or

OF flashing on the digital display

. Press the lower left button to

turn the alarm on or off.

5. Press the upper right button. You will see the hours flashing.

Press the lower left button to change the hour

6. Press the upper right button. You will see the minutes

flashing. Press the lower left button to change the minutes.

Push the lower right button back in.

SET THE TIMEZONE

Setting the time zones allows you to add or remove cities on

the digital display or switch between daylight saving and

standard time. Begin by pressing the lower right button to move

the mode hand indicator to SET mode on the bottom dial.

If the hour or minute hands are obscuring the digital display,

press and hold the upper left button for three seconds. This will

cause the hour and minute hand to retract to the 12 O’clock

position.

Now pull the lower right button out one click.

You will see the

digital display flashing. Press the upper left button to select

SET to display the city or OFF to not display the city. Press the

lower left button to turn summer time on or off. Summer time is

indicated on the lower part of the digital display. Daylight

savings time must be manually set for each city.

4. Pressing the upper right button will allow you to scroll

through all the cities. After setting, push the lower right button

back in.

USING THE TIMER

1. Press the lower right button to move the mode hand

indicator to TMR mode on the mode dial.

2. If the hour or minute hands are obscuring the digital display,

press and hold the upper left button for three seconds. This will

cause the hour and minute hand to retract to the 12 O’clock

position.

3. Pull the lower right button out one click. You will see the

minutes flashing in the digital display. Change the minutes by

pressing the lower left button. Once you have set the minutes

on the timer

, push the lower right button back in.

4. Pressing the upper right button starts and stops the timer.

5. Press the lower left button when the timer is stopped to reset

the timer to its initial preset time.

USING THE CHRONOGRAPH

o use the chronograph press the lower right button to move

the mode indicator hand to CHR mode on the mode dial.

Press and hold the upper left button for three seconds. The

hour and minute hand will retract to the 12 O’clock position.

3 .

o start or stop the chronograph press the upper right

button. If you press the lower left button it will display the split

time for 10 seconds.

4. When the chronograph is stopped press the lower left button

to reset back to zero.

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Accurist Calibre CP00 User Manual Page 3

Comments to this Manuals

Related products and manuals for Watches Accurist Calibre CP00